Analysis of dissolution test sample solutions by high speed capillary electrophoresis

Summary The quantitative use of high speed capillary electrophoresis (HSCE) is examined by applying high voltages across short capillaries. Acceptable performance in terms of injection precision and migration times were achieved within 1–2 minute analysis times. HSCE was used for the novel CE application of dissolution test sample solution analysis. The results generated by HSCE compared well with those generated using validated on-line UV absorbance measurements. It is concluded that HSCE is a viable alternative and supplement to standard analytical methods employed in dissolution test analysis.     

Additives for the reduction of sulfur in FCC gasoline

Sulfur reduction ability of alumina supported zinc, gallium and zinc-gallium additives for fluid catalytic cracking catalysts was evaluated in a micro-activity test unit (MAT). Gallium/alumina showed the highest sulfur reduction of 31%, but the cracking activity of the catalyst was decreased. Zinc-gallium/alumina reduced sulfur in 24 wt.% without decreasing the base catalyst activity.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

The role of proficiency testing in the detection and resolution of calibration bias in the LeadCare® blood lead analyzer; limitations of peer-group assessment

Following implementation of the CLIA ‘88 laboratory regulations, the primary role of proficiency testing (external quality assessment, PT) in the U.S. has been widely viewed as one of assuring regulatory compliance. PT can also be an effective tool for detecting widespread analytical problems, subject to limitations based on the method of PT assigned value determination. A recent case study describes the role of two PT programs in detecting and resolving a calibration bias in the LeadCare blood lead analyzer, and illustrates the limitations of peer-group target determination in fulfilling that PT role.     

Determination of rimantadine in pharmaceutical preparations by capillary zone electrophoresis with indirect detection or after derivatization

Summary Rimantadine is synthetic analog of amantadine; both are antiviral agents used for prophylaxis and treatment of influenza A. A capillary zone electrophoretic (CZE) procedure for the determination of rimantadine has been developed. As the direct determination of rimantadine is poorly sensitive because the compound is almost transparent in the UV/Vis range, several indirect methods were studied. Two were found to be the particularly useful: (a) indirect detection using 5 mM 4-methylbenzylamine in 1:4 methanol-water as absorbing background electrolyte, with detection at 210 nm, and (b) derivatization of rimantadine with 1,2-naphthoquinone-4-sulfonic acid in alkaline medium and subsequent determination of the derivative by CZE (40 mM tetraborate, pH 9.2, detection at 280 nm). Uncoated capillary tubing, 44 cm length ×75 μM i.d., was used for both determinations. The detection limits were 0.1 and 2 ppm for methods a and b, respectively. The methods were used to determine rimantadine in pharmaceutical products and for dissolution testing of Flumadin^? tablets.     

Analytical chemistry and the cone penetrometer: In situ chemical characterization of the subsurface

The development of novel microanalytical techniques forin situ chemical characterization of the terrestrial subsurface environment has grown significantly over the last decade, particularly those instruments that are interfaced to the cone penetrometer. Cone penetrometer testing (CPT) has emerged as an effective means to introduce samplers and probes forin situ analysis of contaminants in soil and groundwater matrices. A variety ofin situ chemical samplers for CPT have been developed that can be driven into the subsurface to collect soil gas, groundwater, or soil samples at depth, thus providing a means of determining the vertical and horizontal extent of contamination. Cone penetrometer testing is also being explored as a means to deliverin situ subsurface sensor probes, including probes based on laser-induced fluorescence, Raman, and infrared spectroscopies for organics; on laser-induced breakdown and X-ray fluorescence spectroscopies for heavy metals; and on passive gamma-ray spectroscopy for radionuclides. The range of analytical technologies used in CPT for the determination of organic and inorganic species in the subsurface is described.     

A new approach in assessing microbiological results in water analysis proficiency testing

Due to the relatively large spread in the results of microbiological proficiency tests, the z-scores are often not able to detect zero or low results as being ‘bad’ results. This paper describes an adapted z-score based on the average or the standard deviation of the 50% ‘highest’ results. The combination of the adapted z-scores of four samples enables a better judgement of the performance of each laboratory. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board or the Publisher.     

Capillary liquid chromatography as a tool for separation of hydrophobic basic drugs. Relation between tests for column characterization and real analysis

Two capillary columns for reversed phase (RP) capillary liquid chromatography (CLC), viz. Nucleosil 100‐5 C18 and LiChrosorb RP‐select B, were characterized by the Walters test, i.e. the chromatographic test proposed for RP stationary phases. Hydrophobicity indices were determined not only in acetonitrile/water mobile phase, as proposed in the test, but they were also measured in buffered systems. This approach was used to quantify the influence of mobile phase composition on the modification of the surface of the stationary phases. In the next step, small basic compounds differing in their hydrophobicity and basicity were selected and their retention on the stationary phases in mobile phases of the same composition as used for column testing was examined. Furthermore, the retention of newly synthesized drugs, chemotherapeutics derived from thioacridine and pyridoquinoline, differing in their structures, basicity, and hydrophobicity, was also studied. The composition of the mobile phases had to be shifted to higher contents of organic modifiers – acetonitrile or methanol – in order to elute these hydrophobic compounds from the columns. The question we wanted to answer was: How is the method for testing of reversed phases related to retention, separation efficiency, and peak symmetry of various analytes?     

Detection of stress whitening in plastics with the help of X-ray dark field imaging

The processing of thermoplastics can induce a wide range of defects such as stress whitening, cavitation and porosity, which can adversely affect the reliability of the final products. Hence, fast and effective non-destructive detection methods for such defects are highly important for quality assurance on production lines. In this paper, X-ray dark field imaging is presented as a new non-destructive testing method that allows the visualization of stress whitening or cavitation efficiently. The performance of the method is demonstrated for the case of an injection-moulded polyvinylidene fluoride part that exhibits stress whitening. Whereas the stress whitening could not be detected by conventional X-ray imaging, it was localized by an X-ray dark field image acquired within a few minutes. Once the precise location of the stress whitening was known, it was possible to verify the result by local micro X-ray computed tomography and by a micro section image.     

痰涂片阳性肺结核患者分枝杆菌培养及药敏结果743例分析

目的研究衢州地区痰涂片阳性肺结核患者对常用抗结核药物的耐药情况,为结核病控制和临床用药提供对策.方法对衢州地区的743例痰涂片阳性肺结核患者痰标本进行酸性改良罗氏培养基痰培养,将培养阳性菌株以硝基苯甲酸(PNB)培养基和噻吩-2-2羧酸肼(TCH)培养基进行菌种鉴定,采用绝对浓度间接法对异烟肼(INH)、利福平(RFP)、链霉素(SM)、氧氟沙星(OFLX)、乙胺丁醇(EMB)、卡那霉素(KM)6种抗结核药物进行敏感性试验.结果743例获得菌种鉴定和药物敏感试验结果者中有结核分枝杆菌复合群728例(97.98%),非结核分枝杆菌15例(2.02%).728例结核分枝杆菌复合群中总耐药率为26.63%,初治耐药率为19.35%,复治耐药率为57.32%;总耐多药率为5.36%,初治耐多药率1.39%,复治耐多药率36.59%.6种抗结核药物的耐药顺序依次为INH 8.20%、SM 7.74%、OFLX 4.80%、RFP 1.86%、KM 1.24%、EMB 1.08%.结论衢州地区肺结核患者中耐药情况较为严重,应开展分枝杆菌培养和药敏试验并根据药敏结果组成个体化化疗方案,同时进一步落实和提高非住院肺结核患者全面监督化学治疗(DOTS)质量,提高各类患者的治愈率,减少各种耐药的发生概率.